MT wheel hub replacement pin

[GJB56]

I see that DDM sells a pair of hubs but I just need the pin. I think they are 5/32 x 7/8 or 4mm x 21.7mm. Has anyone been through this and steer me to a site?

Gary

 

[Phill2]

Just cut down a drill shank to fit

 

[GJB56]

That's a good idea. Thanks Phil.

 

[GJB56]

Email from DDM in case someone else runs into this problem

They are M4x22. These can be used in place: http://www.davesmotors.com/DDM-Replacement-Pins-for-DS-v2-Meaty-Bones.html