MT wont start

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
R

RampageCrazy26cc

Senior Member
Messages
258
Reaction score
7
Location
,VA
well went out to run the rampage mt today and it would not fire..check the venting and it wasnt vapor lock so check the sparkplug and seen it was geting spark but a little spark..so i went and head it check to see if the fuel filter was clean and it was..so i put other sparkplug in and check it the same little spark so im guessing the coil is bad..so got to order that..and dose anyone else haveing this problem with the coil
 
Could be a few things. Are you using fresh fuel? Is the air filter clean? How are your needle settings? If those are good, start looking for damaged gaskets or loose bolts. If those are in good shape, check the coil gap, sometimes they move. Also, do you have adequate compression?
 
Last edited by a moderator:
+ one to D Also if it was running fine when u cut it off Check the Kill swtch one the Engine They seem to stick sometimes !!
 
i have check ever thing and there in check..i put 3 sparkplugs in and nothing the spark is really faint you have to look real hard to see it..and i mess with the killswitch and its coming out when i push it in..so i guess ill have to tear it down tonight
 
he's right

Triggerman77 said:
+ one to D Also if it was running fine when u cut it off Check the Kill swtch one the Engine They seem to stick sometimes !!
Click to expand...
this happened to me once. not getting any spark. tried everything. removed failsafe,checked venting,cleaned air filter,nothin happened. then one guy here said "check your kill switch!!" and voila!! it was sticking. so it was like trying to start your motor with one finger pressing down the damn red button kill switch. got a pair of pliers, yanked it out and wham!! there is a GOD and he likes messing around with 5th scale drivers!! :D
 
Back
Top