Multiple hop-up questions

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Those will fit.

The white pieces are Teflon gaskets not spacers. They help prevent heat transfer.
 
Should have waited for DDM's sale for a majority of my recent purchases :mad:

I assume that this is the shreadstack to use with the HPI Baja filter set? Is it really necessary with that filter set? Does it increase performance since it adds length to the intake? I assume that the center support on the roll cage of the MT would have to be removed with this installed?
 
As for the clutch...are all 8,000 RPM clutches the same? I've read many descriptions on numerous sites stating that they are for CY, HY, or Zenoah motors...but from the pictures, they all look the same, so how do they differentiate? Do the lightened clutches really help out or are they just more prone to breaking later on due to the drilled holes?

Thank you in advance
 
CY/HY clutches have larger bolt holes. If the set comes with hardware they are universal.
 
PrjctStrtFrce said:
Should have waited for DDM's sale for a majority of my recent purchases :mad: I assume that this is the shreadstack to use with the HPI Baja filter set? Is it really necessary with that filter set? Does it increase performance since it adds length to the intake? I assume that the center support on the roll cage of the MT would have to be removed with this installed?
Click to expand...
That is the one I use. It makes it easier to remove the filter, and supposedly gives you a slight performance increase. The bar will have to be removed.
 
The filter will hit the servo linkages. The shreadstack angles the filter above the servo linkages.
 
Back
Top