My 1.5 KingMotor 23cc Buggy doesn't start!!!!

[marantill62]

I've only used my car 3 times and i've never abussed it. Only used on the street. Yesterday after 2 months that i haven't used it, it only turned on for like 5 minutes and now it wont turn on. I was moving the needles on the carborator , but i still doesn't work. Can somebody help me fix the problem?
I have experience with nitro cars but this is much diffucult. Thanks!!!! :helpsmilie:

 

[cryptonblade]

did u try a new startplug also look if the button aint stuck
(they not return always)

 

[charlieboy]

yeah carb settins back to standard and try a new plug

 

[marantill62]

Ok. thank you, I'll go buy the startplug and set it back to standard.. Is the kingmotor carb the same as the baja? ...(H) 1 .50 turn left of the end (L) 1.25 turn left of the end?

 

[charlieboy]

Ok. thank you, I'll go buy the startplug and set it back to standard.. Is the kingmotor carb the same as the baja? ...(H) 1 .50 turn left of the end (L) 1.25 turn left of the end?

theres some threads on here about carb settings bud, double check them but i think there the same.

 

[Rossco]

Is the kingmotor carb the same as the baja? ...(H) 1 .50 turn left of the end (L) 1.25 turn left of the end?

Yes bud,,,they are all the same base settings,,,,

And Welcome

 

[Kamitiro Fan]

Welcome to the forum

 

[marantill62]

Hello everybody!
I wanna thanks everybody for helping me..
i followed all of your instructions , i changed the spark plug and everything is back and running..........
to find the spark plug i had to go to a hobby store and they didnt have it, then i went to some other stores and they didnt have it there either..
so i finally went to lowe's and i found one that exacly the same but it doesn't have the same numbers.. But after finding that i went on ebay and i bought 2.

 

[Timmahh]

Mara, you can get plugs usually at a Nappy Auto or autozone... Small engine and Motorsports shops will likely carry them as well.


sounds like the original plug fouled out on you, which is a sign of rich carb needle settings.

 

[Bigger the Better]

Welcome,

Glad you got it sorted. Did the old plug look real black. If so you may be able to clean it off with a wire brush and reuse it. Or, you may have cracked it in the inside and thats why it went out.
If the plug was real black you can lean the carb slightly until you get it to the right plug color.

 

[cyguy]

if it was a champion, throw it away!! only use ngk plugs

 

[sperera]

if it was a champion, throw it away!! only use ngk plugs

+1 NGK are the go