My shreeders first run

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
cordy

cordy

Well-Known Member
Messages
2,387
Reaction score
0
Location
suburbs of chicago
I was going to run my xb but I blew the front wheel drive.So I ran my shreeder for the first time.Please note the grass was high as the park districk did not cut the grass.But the shreeder plowed right thru it.The driver is angry records(his first time with a bigger electric)the camera woman is Andrea(angry records main squeeze) the voice in the back ground screaming don't worry about reverse go forward is yours truely. th_001-3.webp
 
I'm liking it Cordy. I've been thinking about getting one. It's lighter than my lipo powered Losi Aftershock.
 
Ok I am shure you will like it. Wire it in parrallel and you will get twice the run time. But my dumb butt don't know how to do that. I do know that all the black wires go together and all the red wires go to gether, but I get lost connecting them to the esc. Gosh it`sso light its pure pleasure carrying it.
 
if u wire it in parallel u will have half the voltage and it will be a slug. unless u get 2 6s batterys
 
auto2 said:
if u wire it in parallel u will have half the voltage and it will be a slug. unless u get 2 6s batterys
Click to expand...

Sorry, but if you wire it in parallel you get the same voltage and longer run time. If you wire it in series you get twice the voltage.
 
the car is wired in series from the factory for 2 3s batterys. he said to wire it in parallel to get more run time. then u willhave 3s 8000 mah which will make it a slug.
 
auto2 said:
the car is wired in series from the factory for 2 3s batterys. he said to wire it in parallel to get more run time. then u willhave 3s 8000 mah which will make it a slug.
Click to expand...

Why would wiring it in parallel make it a slug? That doesn't make it slower. It allows for more run time. The only way it would become slightly slower is by a bit more weight, but it doesn't cut the voltage in half.
 
guys a battery is wired in series if it is a 1p pack. cut the pack in half and u have half a pack. half a pack is half the voltage.like d batterys in a flashlight. when u hook positive to negitive pos to neg u get more voltage but the same capacity . hook positive to positive and neg to neg u don't invrease voltage but u get more capacity. since the xbe is wires in series from the start if u go to a parallel set up u have to also double the battery size to to get more run time. i run 2 6s 5000 packs in parallel. thats 6s and 10000 mah.
 
Back
Top