My.... "VX4 Grafil" Lexan body project ....

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
...... here is the eldest child ..... The V4-G body ..... I will put pictures of painted version *as the original color .....:w00t:

:D:D:D:D:D

I will offer a special price for all the forum members (only € 62 => $ 89 )

Prices for clear 1,5 mm Lexan version (not pre-cut) and with stickers windows mask.


0001.webp



0005.webp



0006.webp



0003.webp



0002.webp

:w00t::w00t::w00t:
 
That is the best looking body currently on sale for the V4, how much delivered to UK? Also, you mention it has been made large enough for the Samba pipe but what about the CPI side pipe?
 
Thanks......

Fast and tracked shipping to UK cost € 35

but there is a standard no tracked shipping at € 28


The clear body cost € 62 (only for forum members)

The finished painted body cost € 110 (only for forum members)


Of course the shipping cost is the same for around 7 - 8 bodies ......




If CPI exhaust is this:


http://www.cpiracing.com/wp-content/uploads/2010/07/MCD-V4-Rear-Mount2.jpg


we will have to cut the rear side to fit .
 
Last edited:
grafil said:
Thanks......

Fast and tracked shipping to UK cost € 41

but there is a standard no tracked shipping at € 28


The clear body cost € 62 (only for forum members)

The finished painted body cost € 110 (only for forum members)


Of course the shipping cost is the same for around 7 - 8 bodies ......




If CPI exhaust is this:


http://www.cpiracing.com/wp-content/uploads/2010/07/MCD-V4-Rear-Mount2.jpg


we will have to cut the rear side to fit .
Click to expand...

Hi Grafil,

Thats not the pipe I have, this is it.....

http://www.largescalerc.com/cpitunedpipesidemountedformcdv4-black.aspx

But I have a 10mm x-port so where it mounts to the roll cage is 10mm further back than the one in the picture above. It fits the stock MCD V4 body but it just rubs where the pipe loops round before going down the side, so a little more clearance at that point would be good.

I also use Velcro to fasten the back and sides to the car the only clip I use is one on the front.

How much painted and delivered?
 
:) @Biggaj

from what I see from the photos there are no problems.

To be sure... you should tell me if the curve is higher than the roll bar orizontal line...... can you send me a side pic ??:rolleyes:


Please..... see above for pricing and shipping.......:D:);)
 
grafil said:
:) @Biggaj

from what I see from the photos there are no problems.

To be sure... you should tell me if the curve is higher than the roll bar orizontal line...... can you send me a side pic ??:rolleyes:


Please..... see above for pricing and shipping.......:D:);)
Click to expand...


Hello mate,

When I get the car back togther I will take some pics.
 
Second arrive..... of the Big MonsteRRRRRRRRRRRRR !!!!!!


for a friend..... !!!! *:lol: :lol: :lol:


m2-2.webp



m1-2.webp



m3-2.webp



m4-2.webp



m5-1.webp



m7-1.webp



m8.webp
 
:w00t::w00t:.......

first box of MCD V4-G bodies.... landed yesterday in Australia .....



R31.webp



R32.webp



R30.webp



R8.webp



R18.webp



R5.webp



vg2-1.webp
 
Last edited:
I was a happy camper when Grafil send me a free lexan body due to my two fiberglass bodys vibrated them self to bits.
Finaly got it painted and cut, and was ready to race.
I was totaly crushed when i made the first roll over :'(
As you can see it gave up on me yet again. Now im the price of two bodys down, and again i have to go back to my 1½ year old MCD body.
Tryed to get my money back, but sadly buyer and seller does not see things the same way.
06082011099.jpg

06082011100.jpg

06082011101.jpg
 
Back
Top