Need help on install of tuned pipe on Km Please

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
bluesman

bluesman

Well-Known Member
Messages
63
Reaction score
0
Location
Pa
SDC10400.jpg
[/IMG]

SDC10401.jpg
[/IMG]

SDC10389.gif

I am looking at the parts for the tuned pipe,and I see two gaskets guess one is a back-up? but what is the other piece for:confused: Also the 3rd bolt I think should help install the pipe on the frame? Pardon my being a noob.:blush:Also the other pic is blurry,but it is the Km pipe.Anyone have install pics n this.I see the mounting does not match up pn the back of the buggy.Please any help would be great.
Thanks all.
 
the small spiked item is called an XPORT (TGN Item, if the pipe is a cloned Dom, so is the xport).

and xport is like a small header extension if you will

what you do is install the bolt thru the pipe header, then a gasket, then xport, then 2nd gasket, then screw it down to the cyldiner.


so it should go

Cylinder.
Ex gasket
Xport
EX gasket
Pipe

the rear lower mount on the top part of the rear lower right side roll cage. you ll need a longer countersunk bolt (around 20mm ) and a lock nut to mount the bottom brace up.
 
Back
Top