need help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
M

mastergamr

Member
Messages
45
Reaction score
0
Hey everyone i need some help I just got my order of 7075rc diffs and my question is do i use stock bearings for the sides cuz i see it comes with one bearing in the front but not the side ones? Wow all his stuff looks so good cant wait to put it all togather.
 
Ty Sergio Ok with the three shims that come with the diff do i use all of them and where should i shim from inside or out side
 
Stock bearings. Use the shims only if needed. There should be minimal play when the diff is sealed up. You should still be able to turn the diffs with fingers when done.
 
Ty chapinb. well i found out what was wrong my diff piniom gear is bad need to get new one today and try again. Man i love working on my xt as much as diving it well almost as much lol diving it is awsome
 
mastergamr said:
Ty chapinb. well i found out what was wrong my diff piniom gear is bad need to get new one today and try again. Man i love working on my xt as much as diving it well almost as much lol diving it is awsome
Click to expand...
YEP you are now as sick as the rest of us! LOL
 
mastergamr said:
Ty Sergio Ok with the three shims that come with the diff do i use all of them and where should i shim from inside or out side
Click to expand...
You use them to stop the diff from moving back and forth in the housing. Keeps the gear mesh constant. But them in one at a time in betrween the bearing and the housing ( on the gear side) If the gears bind, take the .005 one out. You should have very little side to side slop and free turning gears.
 
Back
Top