need help

[badboy2]

so i tried mounting the 2 speed but now the layshaft gear touches the engiune case..am i missing something?im using the alum engine mount large which is taller than the stock..so while im waiting for the risers i thot i mount everything now.but then on a dead end again.any ideas?

 

[KauseKaos]

what size is the gear. 14 and 16 should be fine. Any size bigger you have to grind the down the motor.

 

[badboy2]

its the stock i think thats 18t right?so if i change to 14 or 16 what diff gear should i get?

 

[badboy2]

well i counted the tooth of the pinion and its 14t so im thinkin there shouldnt be no problem..can u pls check if i got the right mount for the MT?Thats the one i bought ..

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270524702321

 

[Bigger the Better]

Thats too tall.
The large mount should look almost the same as the plastic one.
Here is one: http://cgi.ebay.co.uk/FG-6486-Alloy...sGames_RadioControlled_JN?hash=item5d282b0c1e

 

[badboy2]

whats the one i got then?its for a different car?

 

[voo2doo]

The one you have looks like a Leopard.
J.

 

[badboy2]

i hope the diff risers will work on the mount..by the way the gears are all lined up now..just waiting for my risers so i mount this shiznit.