Need part # for 2 stripped screws that hold the flywheel cover to my Rampage MT

[gdl357]

Really disappointed that RED threadlocker was used on the small weak screws. I tried heating them with soler and iron...nothing. Tooj the mini torch to the screw head... nothing.

I finally removed them by drilling them out!.

I need the 2 screws that go though the 2 silver aluminum spacers and screw into the bottom of the flywheel cover that the pull start is screwed onto.

 

[gdl357]

Finally found them...

REDCAT RACING
50022
Engine Post & Countersunk Screw (5*25 screws)

 

[Phill2]

They're pretty easy to find but I didn't really understand your description.
I never use thread locker on those - just tighten them well and keep an eye on them.
I haven't had one come loose yet.

 

[gdl357]

New truck and there is red loctite on all screws... even the gear plate screwed to the chassis.

This is mental...it should be 242 Blue at the most for the screws this truck has.

Anyways i guess Redcat likes RED...

 

[gdl357]

I know the screw is a countersunk M5 x 25mm but what is the Thread Pitch: 0.8mm or 1.0 or 1.25 pitch?

 

[Phill2]

I know the screw is a countersunk M5 x 25mm but what is the Thread Pitch: 0.8mm or 1.0 or 1.25 pitch?

Can't help you there sorry.
I just screw em in.

 

[compirate]

Check them against any other M5 screw on it. They're all the same.