new servos

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
rob64n

rob64n

Well-Known Member
Messages
1,021
Reaction score
0
Location
Franklin, In.
Well tomorrow or actually today i get my servos from hitec so i can put my rampage back together and have somethin to run again been missin all the fun.
 
Rob, If you haven't put the Hi-Tecs in, it's pretty painless. Cut off the top mounting 'Nibs' first. Then you just have to screw in the bottom holes to the braces and drill new holes for the top mounts, screw in with same screws and done. :D


BTW, I have had no issues in 4+ tanks on rough ground using the thick white plastic servo arms.
 
krashkrieg said:
Rob, If you haven't put the Hi-Tecs in, it's pretty painless. Cut off the top mounting 'Nibs' first. Then you just have to screw in the bottom holes to the braces and drill new holes for the top mounts, screw in with same screws and done. :D
BTW, I have had no issues in 4+ tanks on rough ground using the thick white plastic servo arms.
Click to expand...
he has had the servos in that truck just had to get them replaced after the new spektrum receiver burnt them up :eek:
 
racetruck said:
he has had the servos in that truck just had to get them replaced after the new spektrum receiver burnt them up :eek:
Click to expand...
Oh OK, then hopefully my post will benefit others...
 
All good krash heck i think the last time i posted doin somethin to my rampage has been a very long time it hasn't needed parts for awhile it's been holding up perfect
 
rob64n said:
All good krash heck i think the last time i posted doin somethin to my rampage has been a very long time it hasn't needed parts for awhile it's been holding up perfect
Click to expand...
Well then that tells me it's high time to buy some parts you don't need *but want.... :D
 
are you using two servos? I ask because i only use one Hitech servo and it dosent turn the big wheels. i ruined the Integy servo so i pulled out the Hitech and it just wont turn the heavy truck now.
 
Yes i only run one servo for steering but i have done 3 changes to the front to make it steer like an 1/8 scale even with the big tires. first i have very little diff fluid almost none in the front diff. second i took the small o-rings out of the small internal diff gears. thrird i ground the sides of diff case where the pinion bearing is so the turnbuckles will clear so i can turn sharper and it works great.
 
I use one hitec 805b with the aluminum futaba mount I have the stock tt wheels and it does fine for me I also get the binding up front by the diff cup just havnt filed it yet .
 
ruthee1 said:
Hi, What Hitec servo is best fit and torque for the Redcat MT PRO. Thanks!
Click to expand...
Hitec 7890-best servo ever till now?


Dimensions (mm): 44.0 x 22.0 x 40.0


Weight (grams): 76.5


Speed (sec): 0.17


Torque (Kg.cm): 44.00!!!!


Ball Raced: Yes


its not a "bolt on".its a standard size servo
 
Back
Top