noob question on MCD servo installtion

[Denz]

hi guys,

just a noob question about installing MCD servos, its my first mcd and im not sure how to install the steering servos. on my 5B theres only one servo for steering and one for throttle/brake. but with the mcd theres two for steering. now my receiver only has one slot for throtle/brake and one for steering. do i need to connect both steering servos in one slot? if yes will it not burn my receiver? i have an Acomms technisport DSSS 2.4ghz radio with a mini receiver.

would appreciate any replies, thanks!!

 

[zouz10]

Denz, what you need to do is get a Y harness here is a link:
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXTSK2&P=ML
Just plug your servos into the leads and then the one plug into your receiver.
If your radio is a 3 channel you might want to get this:
http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.3569/.f
It's while worth it in case you need to shut your car down in a jiffy!!
Good luck

 

[Denz]

thanks zouz10, will this do the job?

http://cgi.ebay.co.uk/Lot-of-3-Y-Co...d_JN?hash=item5882b16184&_trksid=p3286.c0.m14

 

[looker2756]

Yes those will work just fine.