Not starting

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
G

godofm

Junior Member
Messages
20
Reaction score
0
Hey Im new to dis forum and new to the petrol buggy's ive got a brand new dunerunner and its not starting and it doesn't sound like it wants to start
 
Make sure that you are reseting the correct neadles..If it has spark then the deal is the carb! reset the low speed to factory setting and then lein it 1/8 turn or so clock wise .Once it fires up you can richen it so it will sit still and not run away.
 
yea ive got the settings bk to factory tho i broke the pull starter now so i gotta wait for a new 1
 
Check the plug gap, it should be .027 - .028. Any wider and it's wicked hard to get started. Figured that out after a couple of starters and blisters.

Here is a YouTube video you might find helpful.

 
Last edited by a moderator:
ok dats prob why ive been having trouble startin it and i don't think the idle was set right from factory
 
godofm said:
ok dats prob why ive been having trouble startin it and i don't think the idle was set right from factory
Click to expand...
Most of the vehicles come assembled, but it is up to the new owner to properly set them up.

Idle, fuel fixture, trim, end points etc......
 
Back
Top