Nutech Racing Rear exit Pipe

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
It looks like it will but you might need x-port and some extending tube. Unless you want the pipe to be between engine and shock tower
 
Yup I am guessing the it will come up short. It seems like a good fit it will just take some doing to set it right beyone the shock tower. Here is a link to a thread with some pics of it mounted on a Thunderbolt.


I am guessing it has to be better than the stock can for sure and probably an X-Can which is what I was leaning towards. I have found it priced around $99 US.


Mike
 
Last edited by a moderator:
I'll take a closer look. I have a redcat rally and a nutech tb2. I sent my buggy to dino to make these pipes. next time I do some ripping on the tb2 I will pull the pipe.


there's also the mt pipe


http://s304.photobucket.com/albums/nn181/Pipeous/RC/JetPro_pipe_mt/


and dino just made another redcat pipe recently. I posted the pic somewhere. send dino an email, or better yet call him 1 800 4 JETPRO and talk to him. ask him if it fits. he has both chassis' on hand
 
Back
Top