ok guy new motor and esc in xbe

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
L

lefnut

Active Member
Messages
44
Reaction score
0
ok guys what motor should i get and esc and what all parts do i need to make them fit and work what do you have in yours i just bash around the yard and i like a lot of power and 40 to 50 mph got mainly 3s batt at 30c 5000mah zippys. let me know your set up please.
 
I have one of the turnigy 5692 on order, or should I say back order. LOL

I will run it on the stock esc also, mounted to the 7075 RC motor mount. I'm starting with 11-48 and will go up from there. I run a pair of turnigy 6s in parallel.
 
[ame=

[MEDIA=youtube]ya40zAmu36o[/MEDIA][/ame]Not my xbe 2028...but I have the exact setup with 7075rc wheel adapters with baja 5b tires.....
 
RCDAD said:
Moves pretty good.
Click to expand...
Your damn right . That thing gets brought out during special occasions because I don't feel like buying tires every week . I run 14/41 now but I am waiting for 17/41 . I can't wait till i get those new grafil bodies from you to add the icing to the cake .
 
140f after 2 sets of batteries. And that's through grass and drifting on concrete. I have my lid vented in a few places. Weak link is where my batteries come in . After a trigger happy run they are warm and a little puffy.
 
I know you have been looking at my work but for those that haven't Here is how to build a fast buggy!

NespelemProctorbullridingPics001.jpg


This was first. bearings are crap then I installed Hitech servo, Then I bought a fightercat 8s esc. I built my own servo mount so that the esc would fit low and counter balane the motor. I just ordered a new motor that should be here soon. It's big and very powerfull! It's the SKYRC Beast X524 2Y 910KV Brushless Motor For 1/5. It runs from a pair of 5000 4s mached cell. Max discharge is 130c! If this dosen't melt tires then I give up.
 
Back
Top