ok so id this a good servo for my fg comp monster

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
dopeyiniraq

dopeyiniraq

Well-Known Member
Messages
254
Reaction score
1
Location
tn
http://www.hitecrcd.com/servos/show?name=HS-805MG

The HS-805MG heavy duty supersized servo was designed to handle the punishment dished out by the latest wave of large 1/5th scale vehicles. With big gears in a big case powered by a big motor this servos wasdesigned to take abuse and keep on going.

Detailed Specifications
Motor Type: 3 Pole Ferrite
Bearing Type: Dual Ball Bearing
Speed: 0.14 sec @ 6v / 0.19 @ 4.8v
English Metric
Torque: 343 / 275 in/oz@ 6 / 4.8v 24.6 / 19.7 kg/cm @ 6 / 4.8v
Size: 2.60" x 1.20" x 2.30" 65.00 x 30.00 x 58.00mm

Detailed Feature Descriptions
Large 8mm Output shaft
Dual Ball Bearings
Heavy Duty Metal Gear Train
Water and Dust Resistant Case


let me no what u think for the price i think that they would b great at amain they r 60 bucks
 

Attachments

  • 805MG.webp
    805MG.webp
    7.5 KB · Views: 2
Last edited:
They're the same size and power as HPI's SFL10 but half the cost.
I replaced mine with one and they hold up quite well !
Here in oz they are 52 bucks virtually everywhere.
Good budget servo.
But if dollars are not the issue, a Rhino digi4 would be my choice,,,,200 bucks.
 
Rhino's have a lot more usable torque than standards.
The hitec mentioned & HPI SFL10 and some others are rated at 24 Kg,cm stall torque,,,,,eg. it takes 24 Kg to stop it.

Rhino's are rated at 15 Kg,cm driving torque, not stall.

I myself was a bit sceptical at 15 Kg, till I tried one my mate has.

I can stop the hitec & HPI servo's by hand with horn attached, tried to do the same with the Rhino and the damn thing nearly broke my fingers !!
 
If there is provision for 2 servo's , 2 hitec's would be more than enough.

I'm only using 1 in my baja(only room for 1) and that's enough for me !
 
call me crazy, but I have been running these servos for a long while now. super cheap, strong, fast and digital. knock would be plastic gears but I have yet to strip one. one in an fg mt steers it fine, 2 would be awesome
2 servos for $25. you'll be surprised how decent they are. I gambled when broke and bought a pair, now I just email him when I need more. he also sells smaller servos... killer deal on cy27's too ;)
http://cgi.ebay.ca/NIB-R-C-1-4-1-5-...Control_Parts_Accessories?hash=item48366d047a
 
I've bought 9 so far... not 1 had a problem... just like the dsm radio I ordered in from china.. take a chance, sometimes you score. 3 ch 2.4 ghz radio, 8 model memory, adjustable wheel position $43... extra rx's for under $10. $135 shipped got me 8 rx's total and some y cables... we need a good deal once in a while, even if we will spend a fortune on some items.
 
I couldn't agree more pipe, I got the bargain of the year a couple of months back, got a 6 pack of towerpro mg996r servo's, theyr'e 15 kg digitals,ALL metal gears, from Hongy Kongy for 15 bucks Australian + free postage !!
CHEEEEEEEEEEP
 
Back
Top