paddle tires ?????

[semperfi09]

new to the game and live on the beach any where can i get a good set of paddle tires for my xb and what are some things i should up grade to run her in the sand ?? any info will be great

 

[Guest]

You need to get a set of 24mm hex wheel adapters then you can run all the Baja wheels and tires. You will want to upgrade the air filter also. The hpi filter is what most guys will recommend.

 

[semperfi09]

where is the best place to get the adapters?

 

[rcspeedmart]

http://www.7075rc.flyingcart.com/index.php?p=detail&pid=11&cat_id=

or

http://www.rampagehopups.com/product.sc?productId=828&categoryId=31

 

[Deluge1]

To run in sand, you'll need this...

Air Filter Set

Outerwears Airfilter Pre-Filter

Outerwears R/C Pullstart Pre-Filter

Team Chase Carb Diaphragm Filter

And do this mod...

[ame]

[/ame]

 

[rob64n]

To run in sand, you'll need this...Air Filter Set

Outerwears Airfilter Pre-Filter

Outerwears R/C Pullstart Pre-Filter

Team Chase Carb Diaphragm Filter

And do this mod...

If you run the HPI filter you better put an angled Shreadstack on it, if not you'll have a runaway

 

[rob64n]

http://www.davesmotors.com/s.nl/c.885035/sc.12/category.124283/.f

 

[Deluge1]

If you run the HPI filter you better put an angled Shreadstack on it, if not you'll have a runaway

Or just move the linkages to one side of the horn. Like this...

http://www.redcatrampageforum.com/showpost.php?p=67272&postcount=7

 

[Guest]

To run in sand, you'll need this...Air Filter Set

Outerwears Airfilter Pre-Filter

Outerwears R/C Pullstart Pre-Filter

Team Chase Carb Diaphragm Filter

And do this mod...

That throttle shaft mod is great! That's a new one for me. Good info man. Thx

 

[semperfi09]

http://www.7075rc.flyingcart.com/index.php?p=detail&pid=11&cat_id=or

http://www.rampagehopups.com/product.sc?productId=828&categoryId=31

Shouldi order 6 mm or 10mm adapters ? I have the xb

 

[Guest]

The 6 or 10mm referees to the thread size on your axles. If your threads are smaller then the diameter of the axle you need the 6mm. If the threads look about the same size as the diameter of the axle, you have the 10mm threads. The RAMTech fit both sizes. http://www.rcpitstop.net/wheel-adapters.html