post up your work shop!!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
I just like the clean smell and good tuning MOO is right in normal compression engine not a big benifit, but it starts better and seams to be little crisper on throttle and more cosistant on the tuning. It is well worth the extra expense if you carry your cars in a enclosed car like my SUV.
 
C.B. said:
serious coleman fuel that doesn't sound right
Click to expand...
it actually IS right.. alot of people are mis-guided and think they need to run a higher octane in our little mills, when the truth of the matter is higher octanes do nothing for us.. at all. our small(a 30.5 is small) engines have low compression and don't need those high octanes and run perfectly normal using lower 54octane like camp fuels.. i have run it myself and didnt even no the diffrence. unless your running a custom 4bolt mill, you will never get the compression required to "have to" run higher octane fuels.. higher octanes REQUIRE higher compression. so the effects of running 110 are really reversed if you have a basic 30.5 with stacked gaskits.. pointless really
 
Here's my little corner of the house, My wife at least gave me most of it!

IMAGE_029.webp

IMAGE_030.webp

IMAGE_031.webp

IMAGE_032.webp

/monthly_2009_03/IMAGE_029.jpg.0e2709b02e94dd5544d886b85426bbfb.jpg

/monthly_2009_03/IMAGE_030.jpg.9890a3ff027eb307777f333d66a34337.jpg

/monthly_2009_03/IMAGE_031.jpg.ea35ea6e4682b67d38af9f405697f64c.jpg

/monthly_2009_03/IMAGE_032.jpg.c6b2d4be76b03f2edfb1375ec132da0f.jpg
 
kryptonite said:
thats funny cable.. the ramp has a busted shock..lol
Click to expand...
howd you know? :eek: yeah I just recently fixed it with a pair of baja shock shafts. :D I was really taking my time because I really need to buy a new mill right now mines getting very weak and losing compression. I still don't understand why people have so many problems with these rigs, I have almost 8 gallons through my mill and the only thing I've replaced are suspension arms, shock shafts, and ONE set of plastic gears. :confused: I love my ramp:cool:
 
cable97526 said:
howd you know? :eek: yeah I just recently fixed it with a pair of baja shock shafts. :D I was really taking my time because I really need to buy a new mill right now mines getting very weak and losing compression. I still don't understand why people have so many problems with these rigs, I have almost 8 gallons through my mill and the only thing I've replaced are suspension arms, shock shafts, and ONE set of plastic gears. :confused: I love my ramp:cool:
Click to expand...
i hear ya. i have countless amounts of time on my rigs. ive only broke a stearing mount and (3) shock shafts on the mt and my tt went thru 1 stearing mount and lost 2 dog bones. but not broken. just lost..
 
just bumpin this thread back to the top to see if any of the new guys want to show off there play area's... :D
 
Here are some pics of mine

P6030196.webp

P6030198.webp

P6030200.webp

P6030201.webp

P6030203.webp

/monthly_2009_06/P6030196.jpg.8f542bc732d73266d4a8e7b6d88f2ba6.jpg

/monthly_2009_06/P6030198.jpg.c7bbf387fafbf1ab312ba6384a60d6db.jpg

/monthly_2009_06/P6030200.jpg.a4a185c28f3c034ac12526e7187f6754.jpg

/monthly_2009_06/P6030201.jpg.d5f6538eed8a91072ccba3cef403a800.jpg

/monthly_2009_06/P6030203.jpg.bd9c7a4c4c45e33f0f930a9ace19cb2f.jpg
 
Last edited:
My hobby room as doubles as the Laundry room. That's why my R/C's are always heavily cleaned before hitting the inside of the house. Wife is not impressed when its all steeky when shes doing laundry. Well that and the fact that I am a bit of a clean freak.Note the Tankless hot water heater in the first pic. Love it!!!!!!!!!!!
attachment.php
attachment.php
attachment.php
attachment.php


IMG_3669 (Custom).webp

IMG_3671 (Custom).webp

IMG_3672 (Custom).webp

IMG_3674 (Custom).webp

/monthly_2009_06/583c605950268_IMG_3669(Custom).jpg.d07b0ab55eada96d6044c1e1718e694b.jpg

/monthly_2009_06/583c605951f01_IMG_3671(Custom).jpg.27ef6c3048103cebaf344024edca7189.jpg

/monthly_2009_06/583c605953c57_IMG_3672(Custom).jpg.d2e70a41e51df9bbb561ecdfa56680b0.jpg

/monthly_2009_06/583c605955ebf_IMG_3674(Custom).jpg.4a1d3c52b13c81fe6db3e5b0c6d7f654.jpg
 
Last edited by a moderator:
i need to get some help . cannot post picks, man i would love to show you all my set up , been working my whole life to be able to affored this hobbie. and be able to spend time enjoying it, i started running cranes when i decided i could not handle collage, 1990 if you were wondering, by my spelling you can see why collage was not for me, 10 years behind the helm of cranes older than me and 2 final years in a 550 ft tower crane i realised how short life is, opend a 4x4 shop in my 40x40 gararge, thins are going well, specilize in mud racers anc custom fab. this winter after snosledding seson i opend a hobbie shop in my day light basement / sled shop. been a long time since my fisrt t-maxx, things are the best they ever have been, getting marred in sep. to a 30 year old 6-ft red head, no kids, house is paid for, work at home , when ups shows up i drop my tools and spend 2-hrs in the hobbie shop, spend my weekands mud raicing, or camping, life is good, i think most every one i meet into this hobbie are good people. thanks everyone, the picks help me realate.
 
Posting Pics


hardcore,


Here are some instructions:


1) open a free account at www.photobucket.com


2) once you are in, you will need to click on the "My Albums"


1_.webp


3) You should see this:


1.webp


4) Also, in the window above, make certain your "Reduce to" is 1024 x 768 (17" screen)


5) Click "Choose Files"


6) A window will open for you to locate where your photos are stored on your computer:


2.webp


7) Find your photo or photos and click the "Open" button (if you are wanting more than one, hold down the CTRL button on your keyboard)


8) Once you do that it will upload automatically.


To Continue: go to my next post, it won't let me continue (I have too many photos in this post!) :)
 
Posting Pics 2


9) You will be presented with another screen asking you to provide descriptions of the files. You don't have to.


3_.webp


Just click "return to album"


10) The pic you uploaded will probably look like this:


3.webp


11) Highlight the field next to "IMG Code". Copy the code. It will look something like this:


[ IMG]http://blahblahblahblahblahb.blah/albums[/img]


That will be your picture! Then just "submit reply" as you normally would.


Hope this helps.


csp
 
Back
Top