Problem with my Fly Sky??

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
C

Chris T

Member
Messages
12
Reaction score
0
Location
Wrexham, North Wales
Hi, I bought a second hand Mutilator the other day and it came with the Fly Sky FS-GT3B receiver. I have noticed that the previous owner had told me the controls seem to be back to front on the trigger leaver. To move forward you would push trigger back and to break you would press trigger. How can I overcome this. Cheers Chris
 
Chris T said:
Hi, I bought a second hand Mutilator the other day and it came with the Fly Sky FS-GT3B receiver. I have noticed that the previous owner had told me the controls seem to be back to front on the trigger leaver. To move forward you would push trigger back and to break you would press trigger. How can I overcome this. Cheers Chris
Click to expand...

go into the radios setup and reverse the servo. basically it sounds like you need to mess with the servo reversing on that channel ;)
 
+1 on all above m8.
Switch on Tx and Rx (transmitter and receiver) but DO NOT start the engine!!

One channel will control the throttle and brake, the other will control the steering.

Find out which one is which, select the one you need to change, then reverse it. I don't know this radio set, but some are changed with a switch, and others electronically through the radio set's menu.

They mentioned the TRIM. This 'fine tunes' the adjustment. You may have to adjust this.

You'll find it all with a bit of fiddling. If you don't have the instruction booklet, take a look on the internet for the operating instructions for your radio set.

Al.
 
yknotrc said:
Link to instructions you can download.

http://site.hobbypartz.com/manual/FS-GT3B-Manual.pdf
Click to expand...
yes, i have a flyskygtb, it done through the menu on top of the tx,it actually says reverse,just push your large round menu button,then turn it to go on 'rev',then press enter and reverse it, ive been using it for a few months, its o.k for the price and is 2.4,but ive noticed lag when you alittle distance away,and my marder tried to run off yesterday, im going to replace it i think,im not risking it! take note buddy,the last thing you want is the mutilator running off.then again,yours might be fine,my baja lost signal too a few days ago,it was about 10 meters away!!!!!!!!!!!ummmmm.:(
 
yes there is a bit of a lag we noticed too but for 30.00 what do you expect :lol: they work great in 1/10 short course trucks though:cup-1:
 
hndaman1 said:
yes there is a bit of a lag we noticed too but for 30.00 what do you expect :lol: they work great in 1/10 short course trucks though:cup-1:
Click to expand...
yes,you are right,i paid £35 inc postagen for mine, im going to buy a futaba at the end of the month..have read some great reviews on them.
 
Back
Top