Race XB-e

[strodedawg]

here is my build so far


parts list


7075 rc


diff cases front and rear


c-hubs


front knuckles


rear hubs


towers front and rear (modified from standard)


steering rack


stand up servo mounts


custom motor mount


custom layout


Baja wheel adaptors (wheel nut version)


Team Losi Racing


losi five-t center diff/mount with lightened outdrives


Losi five-t shocks front and rear


Losi five-t turnbuckles and rod ends all around


Losi five-t steering link


Kershaw Designs


Custom wound springs


Redcat Racing


aluminum steering plate


aluminum bits on wing mount


HPI


Gunmetal wheel nuts


White Baja wing


Rc-monster


Custom Battery tray (modded)


hardened 15t pinion gear


TBR racing


Rear skid plate


Modded front bumper


Fastlane Maching


HD driveshaft kits front and rear w/ HD diff cups


DGI racing


outdrive savers for center drivescups


GRP


Bulldog front tires for Baja 5b front and rear


Grafil


Xb-e body


Electronics so far


Hitec Hs-5765mh servo with DDM servo arm (until servo saver is ready)


Trackstar 1/5th 730 kv motor


Nanotec 8s 5000 mah 65-130C lipo


Futaba 4pl


still need to do:


driveshafts (on the way) and diffs


mount body


receiver box and lipo


get an esc

 

[strodedawg]

pics this week

 

[Sergio1]

Sounds good looking forward the pictures

 

[Guest]

That's one awesome build! I'm look'n forward to the pics.

 

[twissted]

Nice wish list. Would be awsome to see.

 

[KrashKrieg]

Wow!...Ground up... Should be quite impressive when done.

 

[Ol' fart]

I've seen it up close and it is going to blow you away.

 

[Gaz]

Can't waite to see.

 

[mnbaja]

Sounds awesome !

 

[rookie101]

This sounds incredible, can't wait for the pictures and running video!

Rookie101:

Calgary Crawlers and Crawler Teds Garage

 

[strodedawg]

picshere you go

















/monthly_2013_04/photo1_0001_zps79d3e047.jpg.f97b6e5792fd09e9411b745ab301a633.jpg

/monthly_2013_04/photo3_zps37cf8ca0.jpg.e39433992fffac968e0bfbd1b529578a.jpg

/monthly_2013_04/photo2_zps0da749f2.jpg.9deaa77e565b0c2ebf58f667ac04207e.jpg

/monthly_2013_04/583c606800a59_photo1.JPG.b0255c3fd02e6f598d432abcc96f9c2a.JPG

 

[strodedawg]

two more pics









/monthly_2013_04/583c6067dd3f8_photo3(2).JPG.4135cee63568a665d601b0207e1e4155.JPG

/monthly_2013_04/583c6067de726_photo4.JPG.02d60614ba0c933e9a92a692c9daba57.JPG

 

[Ildy666]

Really nice work....

 

[strodedawg]

thank you, couldnt have done it without ol' farts help

 

[maddmike]

That's a badd ass xb-e . Like how you used the losi center diff. That rides build like a tank there . I wanna see some speed runs lol

 

[Guest]

Nice build!

Are you only going to run one battery?

 

[strodedawg]

for now yes, trying to keep it light.

built an e-baja for someone with two 4s 5000mah packs and he gets 12-14 minutes of run time on the track. this is a higher c packs and i am only geared for about 36mph. lighter car hoping to get same run time. quals where i live are 10 minutes. mains obviously would be a problem, but i don't care to compete with gassers, trying to build the electric class - 7 min qual and 10 min mains for now. want reliability and durability right now as 5th escs are sketchy at best. also depending on the esc i purchase i have found some shorter but taller 5s lipos that would fit as a saddle pack in the rear.

 

[gosha1]

Nice. Is losi center diff direct fit? or it requires some drilling and matching?

 

[Deluge1]

That's awesome! Still impressed by the size of those shocks.

 

[strodedawg]

Nice. Is losi center diff direct fit? or it requires some drilling and matching?

drilled and mounted and some dogbone matching