Rampage xb speed build

[Bhopp]

Hey guys, it begans I ordered aluminum gear plate, boca bearings, 8k clutch spring and clutch kit, I swap the stock engine for a cy26, and I plan to run 35-25-26-24 with hopes of going fast! I never seen it run because the gears broke up and destroyed everything but the shafts and bearings on first run! Wish me luck and any advise is appreciated!

 

[phreerider]

stepping up the tire size will give top speed a boost as well.... having tall gearing requires more HP to spin up to speed. the diff's are stiff with factory goo! nearly locker grade from a recent tear down in my opinion. i went with 3K rear and 7K front..the center is fixed so its all OFF GAS STEER and improves a little. the gearing might go a fraction higher with MCD gears but its all about the top end spin of the mill. good luck lets see it when its running!

 

[Silent_Chaos]

get a lightened Flywheel, it helps a lot.

also, switch to 9500 rpm spring.

Get new tires that have a good grip (front Trenchers on all 4)

 

[maddmike]

Have you thought about getting a full mod motor as it will have more rpms and also more hp... A rear mount jetpro should be able to squeeze even more rpms as its end bleed.