rampage xt hop ups

[dirka13]

Hi there i will be picking up my rampage xt on monday in hamilton, and while i pick it up i plan on placing a purchase with the owner of the store to save on shipping costs. i was wondering if there are any mods i should get while i have the money to spend, i have about $300 to throw into it right away, so my question is what hop ups should i get right away to give me the durability i am seeking due to the cold climate i will be running in. mods and hop up answers both appreciated,thanks every body

 

[bensonly]

Servos and tx/tx will be a must save until the 2 speed is out. Also a tuned pipe will help

 

[dirka13]

what does tx/tx mean, also whats this "2 speed" u speak of

 

[djbuzzard]

I think he meant tx/rx = transmitter/receiver. The 2-speed is the gear drive that Demon has got us salivating for...

 

[rcspeedmart]

all the bearings upgrades from 707 RC Rear Bearing Holders Front Bearing Holders the bearings will wear out quickly then you will have wobbly tires and can not remove the bearing from the holders. The tire foams will turn into dust very quickly so be prepared to put in new foams rather quickly.

 

[zack24]

www.davesmotors.com/s.nl/c.88...t.A/id.4517/.f

a place for engines

 

[cordy]

Get a kill switch. Killer bee is the best.You can find them at www.killerbee.com. That will save you from a wide open runaway.

 

[thomas1]

carbon fiber chass plate

well been a while but blew a head gasket which is replaced but had some free time at work so i made a new plate for my xt came out better then what i thought and its 320g lighter then the stock plus a lot stronger but went to fire it up today and cant get it started so walked away before i threw it away but any ideas on what i need to do to get it running plug is fireing but just don't seem like it wants to start

 

[Deluge1]

Start running down this list.

A Rough Guide To: Engine Starting Problems