Rampage xt steering is bad again

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
E

Erik J.

Member
Messages
69
Reaction score
0
My xt is steering bad again. I just replaced my stock xt wheels for new fg wheels.I already have a better steering servo and it whas good until the new wheels.The left wheel is not standing straight and when i steer to the left it not steers good.Could it be the servo saver again or could it be something else.


If it is the servo saver again does anybody know an upgrade for it. When i pull the wheels when the servo is on,the left wheel can be moved alot and the servo doesn't move. With the right wheel it is a bit less.
 
If you can steer the wheels without the servo moving, you need to tighten up the servo saver.
 
thanks rc dad.i will check everything and let you now if it is fixed.is there a way to drive with no servo saver?because if it is the saver it will be the 10 time I tighten it again.
 
The servo savor is necessary. Without it we would be replacing steering servos all the time. It absorbs impact to protect the steering servo.
 
is it not an option to use 2 steering servo's?the tyres are a little heavier then then stock ones. or I need to have a heavier spring in the servo saver because the wheel also pull straight when I speed up
 
Two servos won't really help. Try putting some blue Loctite on the thumb nut, that should keep it from loosening up. Also, check that little metal rod on the steering rack, it could be bent.
 
Is a alluminium servo saver a good upgrade?And a alluminium servo horn because it is bending a little bit
 
Back
Top