Rcmax billet rear housing

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
B

bonesracer

Member
Messages
22
Reaction score
5
Is there any you tube vids on the set up of putting in the Rcmax rear billet housing? I see there's shims for the bearings and there was a shim on the pinion. Any help will be great. Thanks. Losi 5t
 
bonesracer said:
Is there any you tube vids on the set up of putting in the Rcmax rear billet housing? I see there's shims for the bearings and there was a shim on the pinion. Any help will be great. Thanks. Losi 5t
Click to expand...
Hello what would u like to know ?
 
Thanks, Do i reuse the pinion shim, cause there is a little back and forth movement? The shims i guess go on the out side of the bearings to move the diff back and forth for the clearance. How tight to the pinion? Thanks.! Im putting the billet cups in to.
 
bonesracer said:
Thanks, Do i reuse the pinion shim, cause there is a little back and forth movement? The shims i guess go on the out side of the bearings to move the diff back and forth for the clearance. How tight to the pinion? Thanks.! Im putting the billet cups in to.
Click to expand...

Well we can't tell you where as everyone is different for clearances. If you install it and it's gritty or feeling take it out or move elsewhere until it feels smooth
 
Back
Top