Rear brake assy

[frumpy]

Can someone post a couple of pics of the rear stock brake assy,mine has no rear brake parts at all and I'm a bit confused as there are parts here on pg 3the numbers are 8456 and fg6039/7 that I can't find on DDM??

http://www.fg-modellsport-gmbh.de/_PDF-ANLEITUNGEN/E.06007-12013.pdf

 

[Trebor]

try this

http://pj.b5z.net/i/u/2162054/i/Monster_Truck_parts_list.pdf

hmmmmmm they look similar

 

[frumpy]

Definately a little different but I was able to find the parts in your link,and I think yours is right compared to mine,but I would still like to see some pics

 

[Trebor]

sorry M8 i don't have a car with standard brakes.......if you don't have any

bits for a brake you may consider the FG tuning brake in its place

http://www.wheelspinmodels.co.uk/car/item/Z-FG08449-Tuning-brake-set-for-brake-97__58ac/

 

[sperera]

stock brakes are terrible anyway and wear quite fast.

 

[frumpy]

sorry M8 i don't have a car with standard brakes.......if you don't have any

bits for a brake you may consider the FG tuning brake in its place

http://www.wheelspinmodels.co.uk/car/item/Z-FG08449-Tuning-brake-set-for-brake-97__58ac/

It's been a while since my last FG so bear with me,that looks pretty good does that just replace the stock FG brake partshmy:

 

[sperera]

yup that will fit onto the standard layshaft. it will work allot better too. stock is steel pads with fibre disc. this is the other way around and really how it should have been from the factory.

 

[pipeous]

you also need the motor side plate. I have the 97 on my truck. there's an aluminum part that screws onto the motor side plate. I haven't tried with a normal side plate... my alloy one is a normal but going to put rear discs on

 

[pipeous]

in this pic I had rear discs and took the layshaft brake off. you can see the motor side plate without the brake cam and such

 

[pipeous]

 

[frumpy]

Thx bud,I have front disc brakes now and they work well,so I guess I don't need the rear stock assy.I don't think you can run the stock rear with the front discs off of one servo that also operates the throttle:detective:What I really need then is a couple of pics of the linkage from the servo to the cables,the guy who had this,although it works,looks like it won't hold up too long,have a look here:detective:

 

[Trebor]

yeah you can run the front brakes and rear layshaft brake

and throttle of one servo



K....

 

[frumpy]

That's a nice clean set up there bud,where do I get a servo arm like that?:detective:

 

[frumpy]

Pipeous,I can't seem to find that plate on any of the parts lists

 

[Trebor]

That's a nice clean set up there bud,where do I get a servo arm like that?:detective:

my arm is one of these

http://www.rapid-racing.co.uk/Alum.-Servo-Arm-M3-Full-Futaba/13442.htm

 

[sperera]

yeah if I was running front (which I want to) i wouldnt be running the rear anway.