Savox 0235 for steering

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
BoukeG said:
Okay guys, received the savox 0235 servo. Looks awesome, however doesn't fit 'out of the box'. Need to change the chassis and the servo holders. Drill extra holes... Will post a pix once done.
Click to expand...
ive got a savox 236, you need to either use a knife and scim the servo brackets back a bit so they have a wider space, and yeh more holes.

or you can order a futaba servo mount, and it should fit nice and snug?.

does the xbe not have the extra chassis holes for bigger servos like the MT does?
 
Last edited by a moderator:
BoukeG said:
Okay guys, received the savox 0235 servo. Looks awesome, however doesn't fit 'out of the box'. Need to change the chassis and the servo holders. Drill extra holes... Will post a pix once done.
Click to expand...
Nice. I would like to see the huge servo fitted.
 
I just received 2x 036 ones - they are huge and not a direct fit I had to seriously mod the battery tray to fit one with new holes etc and skimming alot of plastic off to make it work but it does fit well after some patience and work.

now to the throttle side for the second 2036 fitting. The problem is with the plastic servo holders you can cut off the holes and it will mount with new holes you need to move one plastic servo mount to the outer 2 holes ( the chassis has 2 extra holes to move it out) but then you run into the problem that the blue throttle servo tray will now not mount ontop due to enlarging the space ...

ive ordered the futuba upgrade alloy servo mount set due to arrive today ill post some pics if it works - hopefully it will be be a direct fit for the huge savox.

UkISbm.jpg


IOLZxO.jpg
 
Back
Top