school me on engines

[nsjames]

so I've apparently picked myself up a roller.


I need a drop in engine. Trying to keep it under $200.


I assume this one works:


http://www.davesmotors.com/bb42x.html


I've also seen the rovan 30.5cc 4 bolts on ebay for like 180 bucks.


would like it to be drop in, but I suppose I could order carb/muffler and the like separately if that saves money, I'm just a little lost as to what the terminology is.


stuffed crank? I assume this is stroker crank.

 

[Guest]

All the CY motors will bolt right in. You will just need an exhaust and air cleaner that clears the fuel tank and servo.

A stuffed crank is where the the crank is filled in. It reduces turbulence in the case.

 

[Guest]

Here you can see what has been filled or stuffed.

 

[nsjames]

is it really worth it?

seriously considering the king motor one:

http://www.kingmotorrc.com/4_Bolt_30_5cc_Gas_Engine_p/km229.htm

I'd pick up an aftermarket air cleaner/prefilter and a 5t can and call it good.

can't swing pipe and all that at first.

 

[Ildy666]

Seams like a good deal and its a 4 bolt.u got to do what ur pocket allows...

 

[Deluge1]

Stuffed cranks increase case pressure, which in turn increases low end power.

What vehicle is the engine going into?