Servo question - please help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
I

igetbombed

Well-Known Member
Messages
126
Reaction score
0
Hello,


I purchased 1 hitter 5755 and installed it today with some minor modification to get it to fit. After installing it I started testing it, and both the oft and right hand side servos go froward and back in unison vs one going forward while the other goes back. How do I fix this problem? I've tried to reverse the direction on the remote, but got the same result. Please help
 
with dual servos they should move same direction but when mounted in truck it will look oppisite you may have one plugged into your y harness backwards
 
They are both plugged in properly intonthe y harness. I actually just tried tonpurposely hook one up backwards and then neither servo travels at all. Any other ideas? Instead of one steering arm coming forward and one coming back they both move in unison
 
Funny thing if I plug in two 5755's they work as they should. Same with the two stock servos. If I try to use one hitec and one stock, then I encounter the problem
 
I know the logical response is just use both hitec, but the other one is my buddy's not mine. I merely used it to test
 
With 2 HiTecs the wheels will turn on grass when standing still...Will also hold those massive wheels straight under almost any circumstance...


Two diff brands may have opposite turning defaults...
 
by running two different ones you will burn out the amplifier in the hitec because they have different speed ratings
 
Back
Top