Servo Saver Adjustment?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
L

loud72

Well-Known Member
Messages
232
Reaction score
0
Location
The beautiful open skies of the Texas Panhandle (B
So here's the story...


My brother was driving my DR V3 4X4 on the 4th of July and lightly crashed the right wheel which attaches to the steering servo arm into his parked tractor. The servo gears broke in the stock servo. I replaced with a Hitec 5745 last night. Should I be concerned that I need to adjust my servo saver? I cannot seem to move the thing at all. Is that normal?


:confused:


Regards,


Loud72
 
Last edited by a moderator:
you should be able to move the wheels back and forth...if you can't, something is binding....describe better what can't move...


Once that's worked out. you should tighten on the servo saver a little. The much stronger 5745 can take the extra tightening to keep your wheels straighter under load.
 
Ok, let me clarify. The steering is fine. What I can't move is the blue aluminum thumb wheel that sits above the servo saver spring which I assume adjusts the tension on the spring. Is that normal? My fear is that the servo saver spring isnt' working at all and I'm going to trash my Hitec servo if I bump the front tires against a solid object at low to mid speed.


Regards,


Loud72
 
I just use a needle nose to tighten (it's a tough spring so you prolly won't be able to turn by hand anyway) use a pc cloth if you don't want to mar the metal...
 
yes that spring is strong I have to use needle nose to turn it also, and another tick is to use a ziptie to keep the nut from backing all the way out and binding just trun the screw in untill you can get a ziptie between the fame brace and the screw and no more worries
 
chevy said:
that spring wasnt that tight for me! but i keep mine very loose almost bottomed out on top so i don't trash my servo in a crash, just wondering why do you want the servo saver nut so tight? i don't think thats any good for the servo?
Click to expand...
Basically u buy a better servo in any RC so your wheels can stay straighter under heavy load...you use a heavier spring and or tighten down on the spring so it engages less...when the spring does come into play, your wheels are no longer straight...


The metal gear hitec is designed to handle that abuse..my beastly savage flux has a hitec titanium gear servo and heavy spring and those wheels are always straight even going 50mph down the street! Or hammering through rocky dirt path...straight I tell u...tighten that thing down some, it can take it..and u fly straighter
 
Back
Top