servo saver has a mind of its own

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
kryptonite5b

kryptonite5b

Well-Known Member
Messages
2,622
Reaction score
4
Location
philipsburg pa.
whats the cure for a slipping stearing servo saver? on both my rigs they come lose after making just a few turns. hasnt happened before but i had them both apart and now they wont stay tight and just back out.


-thread lock?


-or is something else the problem, like mounting screws too tight?
 
ya its kinda lose on the threads. i can twist it with my fingure till its tight, but then i watch it losen right back up when i turn the wheel. is their a certain part that is stationary? couse my servo saver moves the spring and losens the blue nut. i was just thinking that i did something wrong couse both were fine and now they both suck!
 
I turned mine down a little and then put a zip-tie around the threaded shaft, it still allows the saver to work well and doesn't let it back all the way up and I still have plenty of steering. Well, at least that's how a "HACK" would do it :D
 
Piranha2 said:
Well, at least that's how a "HACK" would do it :D
Click to expand...
oh my.. such a hack!! does that boat even float with all the duct tape?? jk. i was just seeing if i was the only one. im going to try loc-tite first.. was thinking red, but im don't want another "rim" accedent.
 
Back
Top