Servo wiring?

[Trip]

That's a pretty simple setup the servo harness that is!

Does your voltwatch go into the red when you brake with that harness?

 

[BrawnFG]

I see the voltage on the telemetry drop from 6v (regulated by the UBEC) to 4.5v when I brake. since the UBEC is rated at 6A Max, I figure I must either be trying to pull more than 6A, or my NiMh battery isn't up to the job.

I added the UBEC to try and stop the servos glitching. It helps but the glitch isn't totally gone.

 

[Trip]

Do the servos glitch when the motor is off? Or just when it's running?

 

[BrawnFG]

when off, they buzz manicaly if I don't have the UBEC in the circuit, as my battery keeps getting charged to 7v instead of 6v.

 

[atom3624]

Simple question and my apologies, but it's not because the servos are under load?

Al.

 

[Trip]

That's what I was thinking.

My digi 5745's in my steering are constantly talking to me unless I wiggle the steering or bump the front wheels. Analogs may be less linear, but at least they're quiet.