Side veiw

[voo2doo]

Hiya fellas
Can anyone show me a side elevation of the front end of the Baja?
I need to know what part fits under the tower brace on the bottom of the Y-Plate??? If you know what I mean.I have had a look on the manual but its a bit vague.
Cheers
J.:blink:

 

[Timmahh]

ok, under the front is the front bumper which ties into the bulk head under the front of the y plate.
in the rear Y area,on top you have the upper shock tower rear parts that slip in the holes, the bolts that hold them inplace, bolt INTO the top brackets that hold the Steering whiper pins in place under the top Y plate.

hope that helps. there inst alot under the plate. but some. I ll check thru pics and see if i have one to post up.

 

[voo2doo]

Spot on! Cheers Tim.
J.
If you do have a pic that would be most appreciated.

 

[Timmahh]

hth

Timmahh

 

[voo2doo]

Cheers Tim,so those two uprights screw into the steering posts?
J.

 

[Timmahh]

they screw into the top caps (Under the top Y plate) that hold the steering posts inplace yes. the caps should mount on the posts, and have a nut in each one for the bolts to tighten to and sandwich the top y plate between them.

 

[voo2doo]

Thanks again Tim,all sorted now,just couldn't see the way they went.
J.