Snappy rc fuel upgrade

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
M

maddmike

Well-Known Member
Messages
2,644
Reaction score
0
Does the Snappy rc fuel line upgrade for the baja fit on the rampage the kit with 3 lines in the gromet
 
^^^^I just used one of the fittings here. I added an extra hole in the stock grommet.
 
No it won't fit the MT. The euro version of the MT (black out) has a similar set up. You would be better off trying to get your hands on that part.
 
Rcdad is that the snappy grommet or stock. I have not ran my mt but tryin to vent tank just don't know what rout to go. I am thinking of getting the snappy grommet and then runnin a 3rd line with the one way vent. If I go that route I have to seal stock vent in cap correct? And where do you place the vent does it matter how it's fastened. Like does it gotta be verticle or etc....
 
I think he used a stock grommet and made a third hole. Yes you will have to seal the hole in the gas cap I just cut a plastic coke bottle to seal mine and it works just great. It does not matter how you fastened the 3rd line but you would want to run the line line somewhere from the back of the motor I like mine past the chassis because sometime gas will come out of the line and you don't want the gas to leak on the chassis.
 
I always run mine to the bottom of the chassis, out to the side or back. In the event of a roll over, the fuel won't start to drain if the car is upside down.
 
Got the grommet in but wasn't easy used a Allen wrench with rounded to help put in but all is good now
 
Back
Top