I've got a srs4210 avc receiver I'm trying to connect the dyne 1240 dynamite killswitch witch states it's not compatible with any avc receiver but I've seen that you can turn avc off and the killswitch works is this true?
Srs4210 kill switch compatiblity
- Thread starter Richyb93
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
Whoduh
Well-Known Member
Yes. It should be true. The killerbee killswitch has the same problem so i would assume the dynamite one would work the same way.
Yes you can turn the AVC off.
Insert a second Bind Plug in the Disable port before binding.
Link to the manual is below.
Page 8.
https://www.spektrumrc.com/ProdInfo/Files/SPMSRS4210_Manual_EN.pdf
Yes you can turn the AVC off.
Insert a second Bind Plug in the Disable port before binding.
Link to the manual is below.
Page 8.
https://www.spektrumrc.com/ProdInfo/Files/SPMSRS4210_Manual_EN.pdf
- Thread starter
- #3
Managed to get it working on the transmitter by pressing E but when j remove batteries to test if it cuts with loss of power it doesn't any ideas?