Steering servo.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Took a closer look at Baja steering. Servo seems to be OK. Not sure if it's by designed or what, not much of a steering angle. Not seeing any faults. Servo saver is tight.

Has more angle when lifted. Angle stays the same when dropped back down on ground.
 

Attachments

  • IMG_20181001_195125.jpg
    IMG_20181001_195125.jpg
    64.4 KB · Views: 6
  • IMG_20181001_195134.jpg
    IMG_20181001_195134.jpg
    71.7 KB · Views: 6
  • IMG_20181001_195205.jpg
    IMG_20181001_195205.jpg
    59.3 KB · Views: 3
  • IMG_20181001_195213.jpg
    IMG_20181001_195213.jpg
    65.6 KB · Views: 3
ZRC said:
Took a closer look at Baja steering. Servo seems to be OK. Not sure if it's by designed or what, not much of a steering angle. Not seeing any faults. Servo saver is tight.
Click to expand...
Mine was like that, Bajas love to understear. Maybe try to mess with the tie rods? Just make sure to measure and write down the original length
 
Figured with long wheelbase, it needs more steering angle. At least give it more angle so we can trim it.
 
ZRC said:
?. Speaking of tires. I'm thinking these. View attachment 46699
Not sure about front yet.
Click to expand...
I left my fronts alone but if you want to get new ones go for it. Personally I'd get hostile mx tires cuz they're pretty much the same price (like a $2 difference) and because I've had bad experiences with China tires as you can see in the photo. Also those wheels are the once I have and they're not bad actually just the tires are not good.
 

Attachments

  • 15384428457265591524176481184063.jpg
    15384428457265591524176481184063.jpg
    143.7 KB · Views: 3
  • 15384429656947207019675914919741.jpg
    15384429656947207019675914919741.jpg
    134.1 KB · Views: 3
  • 15384429732246263070447626438214.jpg
    15384429732246263070447626438214.jpg
    123.2 KB · Views: 3
  • 15384429846272507137737530469620.jpg
    15384429846272507137737530469620.jpg
    165.9 KB · Views: 3
  • 1538442996619727945159334531428.jpg
    1538442996619727945159334531428.jpg
    122.2 KB · Views: 3
Z.hb71 said:
I left my fronts alone but if you want to get new ones go for it. Personally I'd get hostile mx tires cuz they're pretty much the same price (like a $2 difference) and because I've had bad experiences with China tires as you can see in the photo. Also those wheels are the once I have and they're not bad actually just the tires are not good.
Click to expand...
Were you driving on pavement? :)
 
I had a tire exploded once on pavement. I was pulling a wheelie with Bison, front tires turned into pizza cutters. Left front exploded when front wheels came down, probably hit a sharp gravel/rock.
 
Hook 7.4 volts to that servo and it will push the wheels to full steer even if it is sitting on the ground. I have that servo on 7.2 volts and it's a beast
 
Damn exhaust silicone hose didn't last long . Lucky me, tuned pipe is on its way. ?

Scruffy said:
Hook 7.4 volts to that servo and it will push the wheels to full steer even if it is sitting on the ground. I have that servo on 7.2 volts and it's a beast
Click to expand...
Lipo?
 
Personally i wouldn't run a lipo cuz you have to (well if your responsible) take out the battery to charge so it don't puff up and that's just a paint imo, and the fact that they are kind of a fire Hazzard and if the battery goes up, it's right next to the fuel tank so you can imagine what would happen ?? I'd run a nimh or a LIFE battery.
 
Back
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks