Steering Servo

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
M

merigold2005

Member
Messages
8
Reaction score
0
Location
Massachusettes
I think I am having radio issues due to my steering servo.I have tried 3 radio's in my truck and all 3 have glitched crazily in it.2 of the 3 work perfectly fine in my nitro's.The only thing that is different in my 1/5 is the large steering servo.What is a good servo to replace the junk stock steering servo that the Shenqi comes with?And to anybody thinking of buying a Shenqi/TQ truck........DO NOT BUY IT....... DO NOT BUY IT......It is nothing but a pile of problems.......I have worked on this truck about 10 hours so far fixing everything and I have only driven it for maybe 30 minutes total.I have a Hotbodies/HPI 1/8 truggy and beat the everliving daylights out of it and have never had a problem .Thanks
 
what radios are you using? becouse of the ignition, you are more prone to having glitches with 27mhz's, either fm or am. it is sugjested that you have at least 75mhz radio that is fm or 2.4ghz.. anolog servo's are also prone to glitching. i ran an fm 27mhz for a while and just delt with the glitching. when i put digatil servo's in, it went away for the most part. when my reciever pack started to drain, the glitching would come back
 
I put a DX2.0 in my shenqi hummer and it works great. I did replace the throttle servo with a MG995. My throttle servo was a little weak. To bad to hear about your problems. I have had a few problems with mine but overall mine has been a solid truck. The price I paid for mine was great. I bought upgraded metal gears for mine because the sandy area was wearing them out after a few hours of running. Are you using the stock battery holder for your truck. I am using it with mnh batteries but I found the batteries were coming loose when I was bashing. So I put tape and cable ties around the pack and now I have had no more radio problems. What are you using for a power source. Don't use regular batteries they will not drive the 1/4 scale servo.
 
Back
Top