Steering Servo

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
C

chefjness

Well-Known Member
Messages
69
Reaction score
0
My steering servo in my MT came with one from GWS. I have not had one of those since I was building and flying GWS park flyers along time ago. Anyway, the steering servo is LOUD. Is this normal??? And is this servo doing the job for all of you that have one.


-John
 
MOfroggy said:
I noticed the same noise and also that when I steered left the linkage hit the side of the servo mount bracket, do you see the same thing on yours?
MOfroggy
Click to expand...
I witnessed MoFroggy truck first run over at my shop. I agree that servo is noisy. Rob said the servo was slow , but strong . So knowing that MoFroggy put his linkage on the top hole for more travel per degree which will help the speed. I would not advise this if you are running a radio without "EndPoint Adjustmenst" most time is "EPA" on the screen of most brands. Turn you servo all the right (I Think it is right MoFroggy correct me on this if needed) and then back down the # on your steering EPA until the linkage doesn't foul against the servo mount.


This will save your servo and from heat and may help from stripping gears.


Feel free to copy and paste this in the pre run check list.
 
Back
Top