super bee kill switch

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
it is a super bee just got it a couple days ago so even the super bee hooks up the same as a killer bee thank you
 
454chad said:
hello everybody i was wondering how you hook the super bee up to a stock rampage radio its a 2 ch radio thank you
Click to expand...
It's a 2 ch Tx but a 3 ch Rx so u don't have to use a splitter , you can use the 3rd ch port on the Rx for the Super Bee.
 
brio said:
It's a 2 ch Tx but a 3 ch Rx so u don't have to use a splitter , you can use the 3rd ch port on the Rx for the Super Bee.
Click to expand...
how do i shut off the failsafe in the stock radio or can i leave it on thank you
 
You can leave the failsafe active if you choose to. Not sure how to deactivate it, you can check the small CD that came with the system. There are instructions on there.
 
brio said:
You can leave the failsafe active if you choose to. Not sure how to deactivate it, you can check the small CD that came with the system. There are instructions on there.
Click to expand...
i figured it out you just push the button on the rx and it shuts it off to turn it on push button and move to brake on the tx thank you
 
Super bee stop engine button?

I want to replace the factory stop button with the one that came with the super bee kill switch. I removed the 4 screws holding the cover and it won't seperate to remove the old switch. I don't want to force it. Is there another screw I'm not seeing?
 
There are 4 bolts to the case 2 screws to the shroud and 2 screws from under the chassis. A total of 8 in the flywheel cover.
 
Back
Top