Tarmac tires.

[Speeddreemin]

I know they make them for 1/5 scale but do they make some that fit the stock TT rims?

 

[Ron E]

no you'll have to convert to baja wheels and tires.


easy to do, both my ramps are converted over.

 

[Speeddreemin]

Thanks Ron!

 

[Obeast44]

Then get Hostile slicks, they are more expensive initially but last ALOT longer than HPI Tarmac tires

 

[Forist72]

The BRP's that I use work very well the cost it a bit higher but you can get old good used ones for cheap. They are for 1/4 scale I am going to put them on and try to do some drifting with a low gear set up. Should be fun....


Here is a link for the hubs


http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.3193/.f

 

[Ron E]

The BRP's that I use work very well the cost it a bit higher but you can get old good used ones for cheap. They are for 1/4 scale I am going to put them on and try to do some drifting with a low gear set up. Should be fun....
Here is a link for the hubs


http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.3193/.f

Forist, those are awesome.. i'm def getting them for my big motored tt, I can't wait. so 2 sets of these rear adaptors and where do I get the wheel/tire combo's? do you run 4 rears?


found brp's sight and then a dealer, looks like 260.00 for 4 tires and wheels mounted and 2 sets of adaptors... cool. what are you running, the 3" 0 offset?

 

[Forist72]

I took mine and flipped them around because the hubs on the Ramp are to big to go inside of the rims. They work just as good flipped tho or even better (wider track) the TT will not flip no matter how fast you turn. It is almost like a Formula 1 race car very fun to drive on pavement.