The new Flysky FS-IT4

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
If anyone needs the New firmware update for the Flysky FSiT4. Shoot me and email: [email protected]

It will update it to 1.02 US once updated it will add AFHDS 2 under RX Setup, by default its checked but if you uncheck it. it will allow you to bind several vehicles and not have to keep rebinding them. This seems to have been a hidden feature that was released on the New Boards on the New Flyskkys and you juste need to uncheck the box.
 
mvaughn12 said:
If anyone needs the New firmware update for the Flysky FSiT4. Shoot me and email: [email protected]It will update it to 1.02 US once updated it will add AFHDS 2 under RX Setup, by default its checked but if you uncheck it. it will allow you to bind several vehicles and not have to keep rebinding them. This seems to have been a hidden feature that was released on the New Boards on the New Flyskkys and you juste need to uncheck the box.
Click to expand...
E mail sent!!!
 
RampageHopUps said:
The IT4 is going through a revision to fix the binding and kill switch issues. I would wait 6 months on that one.
Click to expand...
Ok I just got an IT4 I have the Ramtech kill switch in ch3 with ch4 empty. I see on my screen that ch4 is 100% negative and no indicator of any kind something is on ch3. I set sw1 as toggle ch3, when I press sw1 ch3 stays normal [0]. Haven't tried with engine running yet to see if it works. Should I see something on ch3?

https://www.facebook.com/photo.php?fbid=732257253482326&l=d3e7c150db

https://www.facebook.com/photo.php?fbid=732256936815691&l=8a8c86d3d4
 
Last edited by a moderator:
No you will not see anything on ch3 but it has to be set to toggle on the channel 3 make sure that it is not set to return on the 3rd channel. Now in all fairness I tried everything in my power to get the ramtech kill switch to work with the IT4 and I just could not get it to work at all it works great with the GT3B on the 3rd channel. The killer rc kill switch works good on the IT4 because you can adjust the kill switch. There is power always showing on the IT4 radio 3rd channel.
 
rcgasser said:
The killer rc kill switch works good on the IT4 because you can adjust the kill switch. There is power always showing on the IT4 radio 3rd channel.
Click to expand...
I assume you refer to the Super Bee kill switch at Killer RC. Can you explain about the adjustments to the kill switch? How is power always shown on 3rd channel? Right now with the ramtech kill switch on ch3 I see nothing on tx for ch3. I do however show -100 on ch4 with nothing plugged in to it.

Compared the LED status indicator with both stock and IT4. The stock radio off and LED goes red. With IT4 LED just stays off after green blinking post.
 
The ramtech kill switch does not have any adjusments on the kill switch with the killer rc super bee there are dip switches that you can adjust and the IT4 will work. The kill switch will not show up on the radio IT4. The way you have it set up on the stock radio is correct and the ramtech kill switch will work on the stock radio. The 3rd channel has power all the time meaning you can not cut the power on the 3rd channel which will allow the kill switch to work and you can not turn the radio off with the reciver on. That why it is working correctly with your stock radio.
 
Not only is the Ramtech Kill switch non adjustable it takes forever for it to detect a problem and kill the engine. You can cover an awful lot of ground in 5 - 8 seconds.

I ordered a Superbee from Daves DDM takes 4 bus days for delivery. Meanwhile the transformation continues. :cool:
 
RampageHopUps said:
You jus thave to try it. Flyski has made so many changes, I'm not sure if the current radio will work or not.
Click to expand...
I have not gotten Flyski yet. Don't want to buy until be sure.
 
I was unable to get the Ramtech to work with the it4. I got the Killer Bee working fine. Other than being a super tight fit in the radio box it installed right up. I am not using any of the it4 telemetry stuff. The receiver battery voltage still displays without the v-sensor components. Need a radio box that extends over the servo arm or over the drive shaft to get anything more in the box.

Using Ramtech with the stock radio, I had long delays between hitting the switch and the engine actually stopping. Hit the switch and wait 3-6 seconds before it would die. Way to much distance is covered in that period of time.
 
Last edited by a moderator:
I received email that in new gen FS-IT4 problem with kill switch must be solved.

Can some one confirm?
 
Back
Top