Throttle/brake linkage setup

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
M

Marc101885

Member
Messages
41
Reaction score
0
Just my truck out for the first time last night after i set up the servos and all. This thing is awesome, but i got a question, how do you guys have you throttle and brake linkages setup, like the posistion of the springs and all. A picture would be worth a thousand words. Ill get a picture up later to check if no one has one up by the time i get home from work. Thanks
 
Here is a picture of my set up. However I did replace the spring with a piece of fuel tubing. Works great. Just cut a piece of fuel tubing the same length as the spring.

serv1a.webp

P6250001.webp

/monthly_2008_08/serv1a.jpg.c54ba7ecfa9e5f21a10801bfee72acae.jpg

/monthly_2008_08/P6250001.jpg.433046477671b38f9902c8b79117a0b6.jpg
 
Last edited:
Thanks, exactly what i needed, i think im gonna go for the tubing too. seems like i don't get enough brake
 
I have found that my brakes are either full on or full off with both the stock spring and tubing. If the brakes touch the pads the least bit the brakes come full on. I have tried adjusting the EPA but once they touch it's lock up time. What am I doing wrong? Is anyone else seeing this too?
 
Back
Top