Throttle servo buzzing noise

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
M

MTMIKE

Well-Known Member
Messages
153
Reaction score
0
Location
New Haven, In
I got this buzzing noise on my new throttle servo. Replaced both steering servos with new 5765 and thought while I was at it replace throttle too. Had a Hitec 985 which at the time was a step up. Spoke with DDM (great guys) recommend using the HS7945SH. Installed all three today steering servos other than being dual and not the easiest to set-up all three went OK. Only issue is the steering servo will not stop buzzing ever just a little bit. Did not have that with old 985 unit. Any ideas????
 
My 5765 steering servo does it too. Setting your start and end points are critical. That's how I got mine to be quiet. I set it up so there is no load at all when centered and no much more than needed for full turn right and left. I read somewhere that it's has to do with the servo being too sensitive.
 
Back
Top