GreenLep
Well-Known Member
Are there any tips for how to get the tires on the wheels? I cant seem to get it on. The foams are the problem.
Tire mounting
- Thread starter GreenLep
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
jackobyte
Well-Known Member
I have just mounted 4 king cobra tyres, they were,nt as bad as i was told.
If you've got inserts cut them 1/2 to 1 inch short, this will help when putting the tyres on.
Place the tyres (i done 2 at a time) in boiling water and leave for approx 20mins.
They should be nice and supple by then (don't forget to dry them off).
You may need to use a couple of strong screw drivers to prise them on but i just used brute force.
try this and you should be ok.
If you've got inserts cut them 1/2 to 1 inch short, this will help when putting the tyres on.
Place the tyres (i done 2 at a time) in boiling water and leave for approx 20mins.
They should be nice and supple by then (don't forget to dry them off).
You may need to use a couple of strong screw drivers to prise them on but i just used brute force.
try this and you should be ok.
