Todays Flintshire Bash

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
jackobyte

jackobyte

Well-Known Member
Messages
1,661
Reaction score
6
Location
North Wales
Went out with Big J and Voo today, usual place.

I've put a new Red 8000rpm Clutch Spring on the Hummer, its made a big difference on the pick up/.:cool2:

Voo stripped his 46 gear after a jump which didn't go as planned, so borrowed my steel 48 off the MT when my engine mounts shifted (need alloy mounts me think.). Voo Beetle was flying today, wheelieing all over the place :cool2: .

http://www.youtube.com/watch?v=umqKp3shoPw

http://www.youtube.com/watch?v=mXao_m3Pxxg

http://www.youtube.com/watch?v=K9qCHqqJXQw


Hope you've enjoyed

Big E
 
That was cool guys.

Looks like you had a blast. The hummer always amazes me the way it pops wheelies..

I don't know if its the video on you tube, but those cars looks like they are damn fast.. I'm talking like fast-forward fast. It's pretty cool.


Chris
 
Super654 said:
Wicked vids guys...:)

Voo, that bug shifts mate.....:)
Click to expand...

It does that Supe, 0-40 secs I had the 46 spur on and off camera I done the "ditch" you can see it behind the can @ 1.28,landed wrong and blew the spur. Anything after 40 secs I had Ians 48 on .Not as fast compared to the 46.
Its getting harder to keep the front wheels on the deck.You have just got to throttle it gradual until you hit half way then slam it up top!:)
Blew the clutch as well,might have to de-tune it a bit.....save me money:blush:
J.
 
That hummer looks real good jackobyte! Is your beetle standard Voo? That goes some as well!!

As you saw Voo my marder is pretty much as it left the factory but its as quick as my mates alloyed & uprated 30cc. Obviously this is down to the weight but it makes me reluctant to put any alloy on it as I would need to get that performance back thru engine upgrades. What are you boys running/alloy to achieve that performance??
 
Ians is a standard 26cc Zen with a jetpro ,mines a 25.5cc big bore with a FG Tuned pipe and just an alloy front end and gear carrier.
Get a good pipe for it and go for a big bore kit ,that will give you plenty of power.
J.
 
I put the x-can on & just give it a run up the street hence the previous post!! it has def improved the bottom end & tries wheelying but need to compare against my mates 30cc alloyed again for proper results. I will keep you informed!!
 
Thanks for the comments guys. :cool2:

Well pleased on how the Hummer's running at the mo, big grin every time its out.:)
Like i said earlier i need alloy engine mounts as its snatching the Diff Gear on acceleration (you can prob hear on vid), so its ebay time, hope theres some going on there.

big E
 
Back
Top