"Toecutter" HPI Baja 4x4 Mod Prototype

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
K

KneEkolaAs

Member
Messages
16
Reaction score
0
Location
Tassie, Australia
(+ tutorial video to make 1 )

Hey All,


Got tired of waiting for a 4x4 Baja so i made my own...95% stock parts, belt drive 4x4 Hpi Baja SS..

Now this just the protoype people..!!!..the 1st run... it will be better and have some nice bling.. i will be making a few kits but you will need all the

stock parts... basically a complete rear end

Has taken me about 2 Months at about 1 or 2hrs day and cost me about $400-500AUD.

The video is of a totally stock SS motor and pipes... stock muffler in the 1st part of the vid and 10mins later...the HPI pipe.... made a big difference..!!

stock gearing also... NO extra holes drilled in chassis and only very minor modding of 2-3 stock parts... the other parts i made from scratch..

....Still needs a belt tensioner, the belt is actually a little tight..hence no need 4 1 yet ...but just had to take it for a spinn...!!!!

I will make alum V belt pullies later... just stoked that she works..!!!!

and cheeeers to Bryce, Snooze and Gerald...for the inspiration

check out the vid and let me know what you think

Heres some of the early pics:

Toecutter12.webp

Toecutter14.webp

Toecutter4x4Baja1.webp
toecutter4x4Baja2.webp

The 1st run video:
th_Toecutter4x4HpiBajaMod1stRunSS.webp

and a tutorial video:
Part 1
th_How2makea4x4Bajatutorial01.webp
Part2
th_How2makea4x4Bajatutorial02.webp
2nd run vid:
th_Toecutter2ndrun.webp

haven't had a 3rd run yet...
 
looks pretty good even with the back on the front lol you got your self a pretty good machine there , i have a km baja so i could do the same , i would guy the km parts are cheaper than the hpi parts .... anyway good work and thanks for the pictures and videos ...
 
Back
Top