Upgrading needed thoughts

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
O

oscar

Active Member
Messages
30
Reaction score
0
Well Birthday is nearing close with the next few days, and ive been told to make a list to send to family and close friends, just as a basic idea, and well i cant really think of anything more then maybe some new parts for the rig.


Truck so far:


V2 Rampage MT Pro


vertigo axle extenders all around


excavators on desperados


Hitec 5745 for steering x2


Futaba 4pk


List so far:


1. 2 new front SS shafts ( already have 2 for the rear, need to rebuild the fronts )


2. new throttle servo ( had a 645mg that died, would like to upgrade )


3. exhaust? i was thinking TGN?


4. killer kables ( 4 rears )


5. 3rd channel kill switch


6. steel hub and layshaft


7. Moo's indestructable drive cups


8. drive shafts


9. full Stainless Screw kit ( cause im gonna do a full tear down and rebuild, would like some new hardware )


10. full bearing kit ( noticing quite a bit of slop in all of my bearings )


im still using CVD's right now is it worth it to swap to the Dogbones? and obviously i wont be getting all this for my birthday maybe just a few smaller pieces, but i figured if there gonna need to order parts, i may as get some other stuff to make the shipping worthwhile.


Cheers Oscar33
 
Last edited by a moderator:
New list:


1. 2 new front SS shafts ( already have 2 for the rear, need to rebuild the fronts )


2. new throttle servo (5746mg? any thoughts)


3. sprint77 dom pipe


4. 3rd channel kill switch


5. steel hub and layshaft


6. Moo's indestructable drive cups


7. FS Dog Bones


8. full Stainless Screw kit ( cause im gonna do a full tear down and rebuild, would like some new hardware )


9. full bearing kit ( noticing quite a bit of slop in all of my bearings thinking fast eddy, or vertigo?)


i have been contemplating the ONB 30.5 headkit with the sprint77 pipe, and ceramic bearings, but may wait until this motor takes a crap or i get the itch for even more power after the pipe!
 
mooman007uk said:
the tgn is a tumourous pipe and requires body trimming...however I've run with 2 people that run them and they certainly perform and are also pretty quiet, i 've run the sprint 77 dom myself and it's an awesome pipe, probably the best pipe available for the ramp...better than the ddm ramp sidepipe... and puts more weight at the rear which is good for getting piggie to fly better. :D
Click to expand...
hahaha piggie wont see to much air, but i would like to balance her out alittle thats for sure!


also moo would i need anything else with your drive cups? i have a set already from the v1 to v2 upgrade kit? or do i need to get the new big pin ones? and those require modification to the housing?
 
what about for the diff casing? would i have any problems with stock ones i have now, sorry haven't had a chance to read through you diff cup thread!


Basically im gonna do a full rebuild on everything, cause i wanna make this rig bullet proof!
 
Back
Top