v1 dom mod result

[michaellfc95]

iv just done the mod i didnt have a vise so i used screws in my bench to keep the exhourst in place. i had a blund hack saw and a dremmel. so i started it and here is the result
what do u think thanks

heres a vid of the the exhourst moving the exhourst is screwed to the bench

thanks mike

 

[michaellfc95]

o and im puttin clamps on ever end to keep the silecone even more sucure
mike

 

[pablo]

well done young mike jobs a good,un looks well secure allready without any clamps,

 

[michaellfc95]

it is im just making sure with the clamps and might put some high temp silicone were the edges are
mike

 

[Trebor]

looking good with the mod

is your kitchen at the tavern on the hill as tidy as your work bench:lol:

K....

 

[pablo]

looking good with the mod

is your kitchen at the tavern on the hill as tidy as your work bench:lol:

K....

yea don,t want to see my work bench then:lol::lol::lol:

 

[michaellfc95]

yea don,t want to see my work bench then:lol::lol::lol:

haha thats tide comperd to normal i nomaly work on the floor and have the tools on the bench
mike

 

[macgregor]

you need to watch out for the lower part of the exhaust flailing about as it is only held with one mount.I tried this mod and ended up welding my pipe back together.

 

[michaellfc95]

ye i no but im puting the clip on and id raver it move there than crack another head what happens if it dose move about ?
mike

 

[pablo]

ye i no but im puting the clip on and id raver it move there than crack another head what happens if it dose move about ?
mike

it,ll drop off and be loooooooooooooooooooooud:lol::lol::lol::lol:

 

[michaellfc95]

it,ll drop off and be loooooooooooooooooooooud:lol::lol::lol::lol:

o haha better than needing a new head and if i put the clip on it should be ok or i might get the man in me step ndads work to weld another bracket on it on the oter bumper suport
mike

 

[voo2doo]

Mike,where did you get the silicon coupling from?
J.

 

[michaellfc95]

Mike,where did you get the silicon coupling from?
J.

here is the link mate


http://cgi.ebay.co.uk/19mm-3-4-Sili...CarParts_SM&hash=item439bc3acfa#ht_1442wt_896

i had to cut 2 squar parts out were the exhourst bolts go i run it today with for about 20 mins out side my house and it seems to have worked no leaks make sure that link is the 19mm one its only 3/4 inch long though
mike

 

[BrawnFG]

that's a great idea, may be worth trying it with a jetpro as well