Video Up
- Thread starter ryuken168
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
kryptonite5b
Well-Known Member
oh sooo nice!! looks like you had a good time out there with the drifter. what kind of stuff you got planned for it? and how are those tires after all that drifting abuse?
- Thread starter
- #4
Awd
The compound on the tires after 3 tanks are 60% worn. I think I have 2 more tanks before it become pirel-balds.I have a set of FG GT wheels that will go on next. The front wheels are camber 5 degrees w/ a slight toe out and the back is normal. Which I can toe it in the back but no adjustment.
Right now the mods I have on the car are Aluminum Center Differential Mount,
Aluminum gear mount, Aluminum Suspension Arm Holders, Zenoah G270 w/ Walbro 813, Cone filter, Killerbee switch Fast Eddy bearings and running a DX3S radio.
In the set of bearings, the only ones that don't fit are the wheel hub.
Next up I have on order a Rhino Digi4, a Hitec 5645MG servos, a DDM 4600 mah battery, outer wear pre-filter. Will be switching out the shock oil for the heavier weight FG oils.
I have a full set of metal gears on the side, but the plastic ones are holding up fine.
Hoping and waiting on a rear mounted pipe tuned for high end speed.
Will be shooting better videos w/ better drift.
Final stage will be changing it up for off-road videos.
Thankskryptonite said:
The compound on the tires after 3 tanks are 60% worn. I think I have 2 more tanks before it become pirel-balds.I have a set of FG GT wheels that will go on next. The front wheels are camber 5 degrees w/ a slight toe out and the back is normal. Which I can toe it in the back but no adjustment.
Right now the mods I have on the car are Aluminum Center Differential Mount,
Aluminum gear mount, Aluminum Suspension Arm Holders, Zenoah G270 w/ Walbro 813, Cone filter, Killerbee switch Fast Eddy bearings and running a DX3S radio.
In the set of bearings, the only ones that don't fit are the wheel hub.
Next up I have on order a Rhino Digi4, a Hitec 5645MG servos, a DDM 4600 mah battery, outer wear pre-filter. Will be switching out the shock oil for the heavier weight FG oils.
I have a full set of metal gears on the side, but the plastic ones are holding up fine.
Hoping and waiting on a rear mounted pipe tuned for high end speed.
Will be shooting better videos w/ better drift.
Final stage will be changing it up for off-road videos.
- Thread starter
- #5
Pipe
Just picked up a aftermarket pipe
No, not Redcat, DDM or Jetpro, but something nice.
Now the tuning starts, gear ratio change and new servos.
I will do some oval track runs and catch it with a speed gun to see with this Redcat can do.
Will have video shortly in about a week.
Later
Ken
Just picked up a aftermarket pipe
No, not Redcat, DDM or Jetpro, but something nice.
Now the tuning starts, gear ratio change and new servos.
I will do some oval track runs and catch it with a speed gun to see with this Redcat can do.
Will have video shortly in about a week.
Later
Ken
satttheman
Well-Known Member
can't wait. ill probably start tuning and busting out the radar gun on my next week too.