Vocano Help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
R

RcAddictForLife

Junior Member
Messages
11
Reaction score
0
Location
MN
Well driving my rc on a normal day and im hearing click click click over and over


took hole gearing system out and cleaned put all back together and still hear it i'm wondering if its a bent shaft or the gears or its a bearing but the gears look a little wear in tear but overall good but its not stopping vehicle its drives fine but i ran it and it was kinda fading away to were u couldnt here it but u could with ur ear next to it
 
Pull the shafts out, you'll be able to see if one of them is bent. While the shafts are out you can spin each wheel individually to see if the noise is in one of the hubs. Also, could be that you have a pebble jammed in there somewhere.
 
??

Deluge said:
Pull the shafts out, you'll be able to see if one of them is bent. While the shafts are out you can spin each wheel individually to see if the noise is in one of the hubs. Also, could be that you have a pebble jammed in there somewhere.
Click to expand...
yes and i did but it still clicked so just gonna keep running it and see what happens i'm pretty sure a pebble is in between a tooth in the gear but its plastic on brass so replace it with steel and hope it goes away cause i do live and drive on gravel every day with it
 
Back
Top