walbro 990 question

[Deluge1]

That's what it looks like.

 

[blak__jak]

10/4 on the body extenders. Iv'e got an xsc body that I run on the truck some of the time and I didn't want to cut alot of the whell wells out so I made a couple different sizes. one set are stock hight the others are a little long. I made them from 1/2 inch tube you can get at lowes. the i/d of the tubing is a tight fit on the o/d of the stock posts.

 

[Deluge1]

Looks good, dude. Very clean!

 

[Guest]

Cool...

Let's see it with the XSC body.

 

[blak__jak]

I'll post a couple pics as soon as I get a chance mybe later today.

 

[Guest]

Shaweeeeet!

 

[blak__jak]

Heres the xsc body.

 

[Guest]

That looks great on there. I like that better than the little pickup body. Makes it look even huger!

 

[blak__jak]

I kind'a like this one the most. Wish you could get a lexan body like it.

 

[Guest]

That fits really good. Looks like it was made for the MT.

 

[mhambone]

I just bought a 990, do I need a special manifold?

 

[Guest]

No, it's not a must. Just a good time to do it since the carb is off. The stock plastic manifolds can warp and crack from the engine heat. This can cause air leaks. The aluminum manifolds eliminate this problem.

 

[blak__jak]

I didn't notice how mine was warpping until I got it off. I don't know if the carb was keeping it flat or what but once off you could see that it was warped.

 

[Deluge1]

Get an aluminum intake. It'll save you some headaches down the road. I run the ADA intake.

ADA Billet RC / CY Intake Manifold

 

[mhambone]

Ordered one last night. Thanks guys......

 

[Guest]

No prob man!

 

[Deluge1]

Anytime, dude!